Latex Surgical Gloves – Pre Powdered

Dr. Glove > Latex Surgical Gloves – Pre Powdered

Latex surgical gloves - pre powdered

VLHS Surgical Gloves are well designed for surgeons featuring the outstanding fit, comfort, performance, latest technology and quality assurance.


  • Extra strength provides additional protection from surgical debris
  • Curved fingers reduce hand fatigue while the beaded cuffs prevent roll-back and make gloves easy to put on
  • Low powder content that minimizes skin irritation
  • Their anatomical shape makes them fit better, especially for in-between sizes

QUALITY STANDARDS

  • ASTM:D-3577-2009 & EN455-1:2000, EN455-2:2015, EN 455-3:2015 & ISO10282:2014
  • CE Mark – MDD Class Ila and IS13422
  • Manufactured under ENISO13485:2016 quality management system and ISO 9001:2015
  • Using US FDA approved absorbable USP Grade corn starch
  • Bioburden and sterility tested
  • Manufactured in clean environment as per ISO14001:2015

QUALITY CONTROL

  • 100% Inspected
  • Factory Standard of 0.65 AQL for Pinholes.
Material Natural high grade NR Latex.
Design & Features Hand specific; curved fingers; beaded cuff; Low protein gloves
Powder US FDA approved USP grade Bio-absorbable cornstarch and Powder content is < 15 mg/dm2.
Storage The gloves shall maintain their properties when stored in a dry condition at temperature not higher than 30°C
Total Protein content < 100 mg/dm2
Shelf Life 3 years from date of manufacturing
AQL(Factory Slandered) 0.65
Packing *One pair in paper wallet and one wallet per pouch.
*50 pouches in dispenser box.
*10 boxes in one carton / As per customer requirement.
Dimension Properties Dr.Glove Specification ASTM D 3577 / IS 13422 Standard
Length (mm) Min 280 Min 265
Width (mm) 5.5 70 ± 3 70 ± 6
6 76 ± 3 76 ± 6
6.5 83 ± 3 83 ± 6
7 89 ± 3 89 ± 6
7.5 95 ± 3 95 ± 6
8 102 ± 3 102 ± 6
8.5 108 ± 3 108 ± 6
9 115 ± 3 115 ± 6
Thickness (mm) Finger 0.16 Min 0.10 Min
Palm 0.16 Min 0.10 Min
Cuff 0.13 Min 0.10 Min
Physical Properties Dr.Glove Specification ASTM D 3577 / IS 13422 Standard
Before ageing Tensile Strength (Mpa) Min 24-28 24.0 Min
Stress at 500% Elongation (Mpa) Max 5 5.5 Max
Elongation At Break (%) Min 800 750 Min
After Ageing Tensile Strength (Mpa) Min 22 18.0 Min
6Elongation At Break (%) Min 750 560 Min
Water Tightness Test G-1 AQL 0.65 AQL 1.5
Protein Content, Max <50 mg/ dm2

Quick Enquiry