DR.GLOVE – Microsurgery Gloves are specially designed with micro textured surface and optimum thickness for enhanced grip, better fingertip control and superior tactile sensitivity which is best fit for microsurgery operation purposes that require high precision.
| Material | Natural high grade NR Latex. |
|---|---|
| Design & Features | Hand Specific, Beaded Cuff, Micro rough textured, Brown Opaque Colour |
| Coated | Polymer |
| Extractable Protein Level | < 200 μg/ dm2 |
| Powder Residue | < 2 mg/glove |
| Sterilization | Ethylene Oxide / Gamma irradiated as per customer requirement |
| Storage | The gloves shall maintain their properties when stored in a dry condition at temperature not higher than 30°C |
| Shelf Life | 3 years from date of manufacturing |
| AQL(Factory Slandered) | ≤ 1.5 |
| Packing | *One pair in peel pouch *50 pairs in dispenser box *20 boxes in one carton |
| Dimension Properties | Dr.Glove Specification | ASTM D 3577 / IS 13422 Standard | |
| Length (mm) | Min 280 | Min 265 | |
|---|---|---|---|
| Width (mm) | 6 | 76 ± 3 | 76 ± 6 |
| 6.5 | 83 ± 3 | 83 ± 6 | |
| 7 | 89 ± 3 | 89 ± 6 | |
| 7.5 | 95 ± 3 | 95 ± 6 | |
| 8 | 102 ± 3 | 102 ± 6 | |
| 8.5 | 108 ± 3 | 108 ± 6 | |
| 9 | 115 ± 3 | 115 ± 6 | |
| Thickness (mm) | Finger | 0.18 ± 0.02 | 0.10 Min |
| Palm | 0.16 ± 0.02 | 0.10 Min | |
| Cuff | 0.12 ± 0.02 | 0.10 Min | |
| Physical Properties | Dr.Glove Specification | ASTM D 3577 / IS 13422 Standard | |
|---|---|---|---|
| Before ageing | Tensile Strength (Mpa) | Min 24 | Min 24 |
| Elongation At Break (%) | Min 750 | Min 750 | |
| After Ageing | Tensile Strength (Mpa) | Min 18 | Min 18 |
| Elongation At Break (%) | Min 560 | Min 560 | |
| Water Tightness Test G-1 | AQL 0.65/1.5 | AQL 0.65/1.5 | |
| Protein Content, Max | < 200 μg/ dm2 | < 200 μg/ dm2 | |
